|
Assembling:
- Put he camera mount on the tank cap and check which screws will be used to fix it.
- Unscrew the 3 or 4 screws – Important: keep the different length of the screws in mind for the supplied screws which are longer.
- Put the camera mount again on the tank cap and fix it by screwing in the supplied screws.
- Now screw the white adjustment screw into the camera mount until it gets in contact with the tank. Attention: Side with the small rubber sticker has to be on the bottom to shield the tank from scratches.
- Put the camcorder on the camera mount and fix it with the supplied camera screw.
- Now screw in the adjustment screw as long until the position of the camera is suitable.
And now have much fun with your new camera mount…and always remember…be cautious! |
|
|
Assembling